CCNA Certification Training

Course 2934

  • Duration: 5 days
  • Language: English
  • Level: Foundation

The Implementing and Administering Cisco Solutions (CCNA) v1.0 course gives you a broad range of fundamental knowledge for all IT careers. The CCNA certification training covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. Through a combination of lecture, hands-on labs, and self-study, you will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course also gives you a foundation in network programmability, automation, and software-defined networking.

CCNA Certification Training Delivery Methods

  • In-Person

  • Online

CCNA Certification Training Information

In this course, you will learn how to:

  • Identify the components of a computer network and describe their basic characteristics
  • Understand the model of host-to-host communication
  • Describe the features and functions of the Cisco Internetwork Operating System (IOS®) software
  • Describe LANs and the role of switches within LANs
  • Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
  • Install a switch and perform the initial configuration
  • Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
  • Describe the TCP/IP Transport layer and Application layer
  • Explore functions of routing
  • Implement basic configuration on a Cisco router
  • Explain host-to-host communications across switches and routers
  • Identify and resolve common switched network issues and common problems associated with IPv4 addressing
  • Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
  • Describe the operation, benefits, and limitations of static routing
  • Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
  • Describe the application and configuration of inter-VLAN routing
  • Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
  • Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
  • Configure link aggregation using EtherChannel
  • Describe the purpose of Layer 3 redundancy protocols
  • Describe basic WAN and VPN concepts
  • Describe the operation of Access Control Lists (ACLs) and their applications in the network
  • Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
  • Describe basic Quality of Service (QoS) concepts
  • Describe the concepts of wireless networks, which types of wireless networks can be built, and how to use Wireless LAN Controllers (WLCs)
  • Describe network and device architectures and introduce virtualisation
  • Introduce the concept of network programmability and Software-Defined Networking (SDN) and describe smart network management solutions such as Cisco DNA Center™, Software-Defined Access (SD-Access), and Software-Defined Wide Area Network (SD-WAN)
  • Configure basic IOS system monitoring tools
  • Describe the management of Cisco devices
  • Describe the current security threat landscape
  • Describe threat defence technologies
  • Implement a basic security configuration of the device management plane
  • Implement basic steps to harden network devices

Training Prerequisites

There are no formal prerequisites for CCNA certification, but you should make sure to have a good understanding of the exam topics. Before taking this course, you should have:

  • Basic computer literacy
  • Basic PC operating system navigation skills
  • Basic Internet usage skills
  • Basic IP address knowledge

Certification Information

This course helps you prepare to take the 200-301 Cisco® Certified Network Associate (CCNA®) exam. By passing this one exam, you earn CCNA certification. This course also earns you 30 Continuing Education (CE) credits towards recertification.

The 200-301 CCNA exam certifies your knowledge and skills related to network fundamentals, network access, IP connectivity, IP services, security fundamentals, and automation and programmability.

CCNA Certification Training Outline

This class includes lecture sections and some self-study sections. In instructor-led classes, lectures are delivered in real-time, either in person or via video conferencing. In e-learning classes, the lectures are on recorded videos.

 

Section title

Learning mode

Implementing VLANs and Trunks

Lecture

Routing Between VLANs

Lecture

Introducing OSPF

Lecture

Building Redundant Switched Topologies

Self-study

Improving Redundant Switched Topologies with EtherChannel

Lecture

Exploring Layer 3 Redundancy

Self-study

Introducing WAN Technologies

Self-study

Explaining Basics of ACL

Lecture

Enabling Internet Connectivity

Lecture

Introducing QoS

Self-study

Explaining Wireless Fundamentals

Self-study

Introducing Architectures and Virtualisation

Self-study

Explaining the Evolution of Intelligent Networks

Lecture

Introducing System Monitoring

Lecture

Managing Cisco Devices

Lecture

Examining the Security Threat Landscape

Self-study

Implementing Threat Defense Technologies

Self-study

Securing Administrative Access

Lecture

Implementing Device Hardening

Lecture

  • Get Started with Cisco Command-Line Interface (CLI)
  • Observe How a Switch Operates
  • Perform Basic Switch Configuration
  • Implement the Initial Switch Configuration
  • Inspect TCP/IP Applications
  • Configure an Interface on a Cisco Router
  • Configure and Verify Layer 2 Discovery Protocols
  • Implement an Initial Router Configuration
  • Configure Default Gateway
  • Explore Packet Forwarding
  • Troubleshoot Switch Media and Port Issues
  • Troubleshoot Port Duplex Issues
  • Configure Basic IPv6 Connectivity
  • Configure and Verify IPv4 Static Routes
  • Configure IPv6 Static Routes
  • Implement IPv4 Static Routing
  • Implement IPv6 Static Routing
  • Configure VLAN and Trunk
  • Troubleshoot VLANs and Trunk
  • Configure a Router on a Stick
  • Implement Multiple VLANs and Basic Routing Between the VLANs
  • Configure and Verify Single-Area OSPF
  • Configure and Verify EtherChannel
  • Improve Redundant Switched Topologies with EtherChannel
  • Configure and Verify IPv4 ACLs
  • Implement Numbered and Named IPv4 ACLs
  • Configure a Provider-Assigned IPv4 Address
  • Configure Static NAT
  • Configure Dynamic NAT and Port Address Translation (PAT)
  • Implement PAT
  • Log into the WLC
  • Monitor the WLC
  • Configure a Dynamic (VLAN) Interface
  • Configure a DHCP Scope
  • Configure a WLAN
  • Define a Remote Access Dial-In User Service (RADIUS) Server
  • Explore Management Options
  • Explore the Cisco DNA™ Center
  • Configure and Verify NTP
  • Configure System Message Logging
  • Create the Cisco IOS Image Backup
  • Upgrade Cisco IOS Image
  • Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-shared Key (PSK) Using the GUI
  • Secure Console and Remote Access
  • Enable and Limit Remote Access Connectivity
  • Secure Device Administrative Access
  • Configure and Verify Port Security
  • Implement Device Hardening

Need Help Finding The Right Training Solution?

Our training advisors are here for you.

CCNA Certification Training FAQs

This course is designed for anyone seeking CCNA certification. The course also provides foundational knowledge for all support technicians involved in the basic installation, operation, and verification of Cisco networks.

The job roles best suited to the material in this course are:

  • Entry-level network engineer
  • Network administrator
  • Network support technician
  • Help desk technician

This course will help you:

  • Learn the knowledge and skills to install, configure, and operate a small- to medium-sized network
  • Gain a foundation in the essentials of networking, security, and automation

The CCNA v1.0 course is a broad-based training programme that provides fundamental knowledge for all IT careers. It covers topics such as configuring network components, managing network devices, identifying basic security threats, and network programmability, automation, and software-defined networking.

The course is available in both in-person and online delivery methods over 5-days. This course also requires 3-days of self-study.

In the course, you will learn how to identify the components of a computer network, understand the model of host-to-host communication, describe the features and functions of the Cisco Internetwork Operating System (IOS) software, install and configure switches, routers, and wireless LAN controllers, and understand basic security threats. You will also learn about IPv4 and IPv6 networking, routing, VLANs, dynamic routing protocols, WAN and VPN concepts, and network programmability and software-defined networking.

There are no formal prerequisites for CCNA certification, but you should make sure to have a good understanding of the exam topics. Before taking this course, you should have:

  • Basic computer literacy
  • Basic PC operating system navigation skills
  • Basic Internet usage skills
  • Basic IP address knowledge

The Cisco Certified Network Associate (CCNA) exam is a certification exam that tests your knowledge and skills related to network fundamentals, LAN switching technologies, IPv4 and IPv6 routing technologies, WAN technologies, infrastructure services, and infrastructure security.

The course earns 30 Continuing Education (CE) credits towards recertification.

CCNA certification validates your knowledge and skills in network fundamentals, LAN switching technologies, IPv4 and IPv6 routing technologies, WAN technologies, infrastructure services, and infrastructure security. It demonstrates to employers and clients that you have the knowledge and skills to design, implement, and troubleshoot Cisco network solutions.